In-Ground Smart Dog Training Fence System for 2 Dogs

Main Features:

This hidden fencing system is among the reliable, cost-efficient pet containment systems available today. A buried wire transmits a harmless radio signal. When your dog approaches the boundary, the signal causes the dogs collar receiver to deliver a warning beep first. If your dog continues closer to the boundary, the system will issue a mild shock. If your dog continues further, the system will issue a stronger shock until your dog returns within the boundary you have set up. Your dog will naturally seek to avoid correction, and is content staying within established boundaries.

* Pulsed Proportional Stimulus- The closer your dog gets to the boundary, the more intense the shock will be.
* Progressive Tone Stimulus- A warning tone will be issued first, then a shock stimulus if your dog continues to move closer to the boundar.
* Variable Field Width Control- Allows you to precisely control the width of the signal field.
* Audible and Visual Wire Break Indicators- Should your buried wire ever break, a loud sonic alarm will sound accompanied by a flashing light.
* Speed Detect Anti-Run Through- The faster your dog is moving, the quicker the higher level of intensity is issued.
* Built-In Lightning Protection- Protects Transmitter from power surges caused by lightning strikes.
*Multiple Collar Operation- Add as many collars as you like to contain. You can even control muti-dogs one time, if you have enough collars(the additional collar you have to buy it urself).

STEP 1:
Know to fit the collar on your lovely dog:
The collar strap should fit snugly towards the top of your dog's neck with the collar receiver box on the bottom of the neck. You should be able to get one finger between the collar strap and your dog's neck. The contact points must make contact with the dog's skin for proper operation. A little hair thinning may be required.
PLS Notes:
A. Always use the rubber insulators and the collar strap. They provide insulation in damp conditions and keep the collar receiver secure.
B. A small amount of hair thinning or removal makes contact with the dog's skin easier.
C. This product is recommended for dogs six months of ages and older.
D. Occasionally, check the tightness of the receiver probes to ensure the receiver does not fall off of the collar. Lost collars are not covered under your warranty.

STEP 2:
KNOW THE WALL-MOUNT TRANSMITTER
The transmitter is the system's control center. The transmitter sends a coded radio signal around the containment wire you will install.
1. Field width Adjustment - control the distance from the wire your dog can venture before hearing the warning tone
2. Internal Lightning/Surge protection - Protects transmitter from power surges or lightning stricks near the boundary wire
3. Loop Wire Terminals - Connections for the containment wire.
4. Power Connection - Power for the containment systemsupplied by the 12 volt adapter plugged into any 110V - 240V outlet.
5. Power - Turn field width knob counter clockwise for ON/OFF Switch.
6. Yard Size Jumper - For system installations using 610 meters or more of wire.
7. When the OK light on the wire turns on, it means the system is working properly. When the BREAK light on the wire turns on together with beeping sounds, please click the wire.
BUT PLEASURE Notes:
Recommend you unplug the transmitter and disconnect the fence wire during lightning storms.
Package Included parts all as the pics shows above.

STEP 3:
Know how to set the stimulation:
The stimulation is pre-set at the factory for optimal performance. Should your dog enter the containment field she will hear a two second warning tone. After training she will know to back into the safe part of the yard. By moving forward or staying in the same place, the collar will deliver a continuous level of stimulation until she moves back into the yard.